皇冠官网app皇冠官网app的k系列混合器的逆流混合作用是最有效的混合技术，一致均匀, homogeneity and rapid mix time.
Lancaster Products K-Series mixers 是制备粉末状材料的理想工具吗. 它们的高强度作用允许混合即使是最困难的材料. Powders, slurries, 膏体(有或没有水或粘合剂)可以在极短的循环时间内混合. Dissimilar powders, differing in density and/or ratio in a formulation, are easily blended into homogeneous mixtures.
k系列混合机擅长生产高度可重复的均匀混合料和颗粒.
K3-K3.5 High Shear Mixers: [DOWNLOAD PDF]
- W非常适合小型生产工作或原型制作
- Working Capacity: 3.5 cu.ft (100 L) to 6.0 cu. ft. (170 L)
K4-K10 High Shear Mixers: [DOWNLOAD PDF]
- 大容量混频器适用于高通量应用
- Working capacity: up to 210 cu. Ft/6000L
OPTIMIZE YOUR MIXING PROCESS
Whether you are 开发新流程或改进现有流程, using a Lancaster Products High Shear Mixer can transform your mixing process. 我们的混合器可用于实现多种目标, including mixing cycle times, moisture and air entrainment, particle size distributions, yields, surface draw-down, pluming action, and tip speed requirements.
处理时间可以大大减少，同时提供更均匀的批(混合)使用皇冠官网app搅拌机.
*基于在实验室和生产环境中取得的结果
The counter-current mixing action in all Lancaster Mixers provides:
*可处理低于1/3额定容量的部分批次而不影响混合质量
THE MOST EFFECTIVE MIXING TECHNOLOGY
The Lancaster Products counter-current mixing action 最有效的混合技术是快速和一致的均匀.
- 物料被有效地输送到反向旋转的初级混合转子, 二次混合犁和侧壁刮板-所有战略性放置，以提供最大的材料混合.
- Our design allows for increased relative particle velocities and provides countless material exchanges throughout each batch cycle
- 我们的高强度混合器允许单独改变组件速度，以增加巨大的多功能性，以满足几乎和材料混合的挑战.
ALL IN ONE MACHINE
混合，制粒，制粒，制浆，溶解，除尘和反应-都在同一台机器中.
NO DEAD ZONES
实际上没有死角或未清理的表面可以放置配料. 旋转盘、侧刮板和反向旋转犁的独特组合 effectively eliminates all dead zones.
FASTER MIXING
处理时间可以大大减少，同时提供更均匀的批处理. 我们在实验室和生产环境中的经验 is that free-flowing powders and granular materials can reach desired homogeneity in under a minute.
在皇冠官网appk系列混合器中混合10至20分钟即可达到3至6小时球磨时间的混合质量.
LESS ADDITIVES
In most cases, because the Lancaster counter-current mixing action is so thorough, less binder materials or water is required.
CONTINUAL MATERIAL REMOVAL
犁和侧刮板也提供了连续的材料从锅底和侧壁表面清除.
CUSTOM MIXING DESIGN
皇冠官网app应用工程师朝着许多目标设计, including: mixing cycle times, moisture and air entrapment, particle size distributions, surface draw-down, pumping action and tip speed requirements.
VARIABLE SPEEDS
混合作用的强度和类型可以通过 the use of various style mixing rotors and speeds. 我们的技术覆盖颗粒，脱纤维，脱块，绒毛和浆料.
Specifications
K-Series High Shear Mixers
| Overall Dimensions | Pan Dimensions | Working Capacity | Power | ||||||||||||||||||||||
| K-1 |
|
|
|
|
|||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| K-3 |
|
|
|
|
|||||||||||||||||||||
| K-3.5 |
|
|
|
|
|||||||||||||||||||||
| K-4 |
|
|
|
|
|||||||||||||||||||||
| K-5 |
|
|
|
|
|||||||||||||||||||||
| K-6 |
|
|
|
|
|||||||||||||||||||||
| K-7 |
|
|
|
|
|||||||||||||||||||||
| K-8 |
|
|
|
|
|||||||||||||||||||||
| K-9 |
|
|
|
|
|||||||||||||||||||||
| K-10 |
|
|
|
|
HORIZONTAL PAN DESIGN
ROTOR
所有皇冠官网app皇冠官网appk系列混合器的主要混合元件是单件反向旋转高速转子. 混合转子的设计将根据具体的工艺要求而有所不同.
单片基座转子结构有助于叶片更换后保持转子平衡. 转子由易于接近的v带驱动系统驱动. The drive motor can be single speed, multiple speed, 或根据具体加工要求进行变速. 驱动护罩完全封闭电机的顶部和转子主轴.
PLOW
高品质的齿轮马达驱动安装在混合器结构的顶部. 该装置转动低速二次搅拌犁. These wear-resistant plows continually sweep the entire surface of the pan bottom.
这种高效的慢速清扫动作防止材料积聚在锅底，也提供 enhanced mixing action and faster mixer discharging.
Lancaster Products
920 Mechanic Street
Lebanon, PA 17046
Local: 717.273.2111
Toll Free: 800.447.7351
Email: [javascript protected email address]
Office Hours:
Mon - Fri: 8:00 am - 5:00 pm
